Mounting- and operation
Your lawnmower has been manufactured accordingly to the latest safetyspecifications.
This includes a brakesystem, which will stop the engine and knife within 5 seconds,
when the brake is activated. Any safetyprecaution is only usefull when it is followed
therefore follow these description when you mount your lawnmower.
Notice: There are not throttle regulation on this model.
Mounting of handle
11
•
Mount the handle with the following 2 pins.
Lift the top handle into the right position.
Now you only need to tighten the two
wingnuts (3), which holds the top and the
buttom handle together.
Mounting of cables
•
All cables are mounted from the factory.
•
Mount the cable to the knifebrake (4)
Mount the bolt (5) through the top handle
and the cable (7).
Finish by mounting the starterhandle (8).
Start the engine
•
Always add engine oil before start !
•
First prime the engine. Do this by pressing
the primer 3 times. Or until you can feel
resistance.
Handle
Cable
holder
Fig 2
4. Cable stop
z-ende.
5. Bolt for cable
7. Stopcable
8. Holder
Engine
brake