19
8. Blades
The blades will be worn during use, and will soon or later need to be replaced.
The time of replacement depends on the conditions of the soil in which the machine works.
An extra set of blades is included with machine to extend the working time.
Replacement:
Before the knives are replaced, make sure to disconnect the
power supply first. Then loosen each blade with an allen key
wrench. Fit the new blades together with the lock washers,
And tighten the bolt.
Be careful to fix the blades in the right position.
Extra set of blades can be purchased at your local dealer
or online at
www.texas.dk
Part number for a blade set (2 pcs.) is: 421117
9. Maintenance and storage
Clean all grass and soil from the machine after use.
If not to be used for an extended period of time, coat all metal parts in grease to avoid
corrosion and rust.
Use original spare parts only
10. Troubleshooting
Problem
Cause
Solution
Motor will not start:
No power
Check power supply and cables
Defective safety button
Contact authorized workshop
Abnormal noise
Blade stuck
Switch off machine and allow it to
stop completely. Remove
obstruction.
Loose bolts, nuts or safety
equipment.
Tighten. Contact authorized
workshop if noise persists
Abnormal vibrations
Depth too great
Replace or contact authorized
workshop
Depth too great
Use correct depth
Poor cutting action
Depth too shallow
Use correct depth
Worn blade
Replace or contact authorized
workshop
