•
Watch out for the jet.
The high pressure cleaner can be dangerous to use and
therefore it is good to follow these precautions. The water jet must never be directed
towards anything living and you must not use it to clean shoes and clothing while you
are wearing it. The water jet is so powerful that it can easily cut through your skin or
injure an eye. Children and animals may not stay close to the work area when the
product is being used. The length of the lance protects the user against coming to
close to the jet but if you are cleaning a wall the water with be thrown back at you and
then it would be a good idea to carry eye protection. Ear protection is also a good idea
as the product is quite noisy. The noise is increased if the water hits e.g. a metal plate.
Disposal
Waste electrical products must not be disposed of with the household waste.
This tool should be taken to your local recycling centre for safe treatment.
3. Identification
4. Assembly
8
7
6
5
4
3
2
1
1. Handle for transportation
2. Cleaner
3. Extention pipe
4. Spray pistol with trigger.
5. High pressure hose
6. Transportation wheels
7. Standard lance
8. Soap container
9. Cord - (not shown)
10. Turbo lance - (not shown)
When you receive the cleaner, it is almost ready for use. You should fit wheels,
transportation handle, high pressure hose and pistol.
1. Click the wheels into the holes on the sides of the product.
2. The transportation handle is clicked in place under the engine.
3. The high pressure hose is screwed onto the water outlet on the left side of the
cleaner.
4. The pistol is fittet onto the hose.
5. The extension lance is fitted to the pistol.
6. Fit either the standard or the turbo lance onto the extention lanse.
7. Water supply is connected on the right side of the cleaner.
10
