10
When using the tiller you are responsible for any third party in the area where
the machine is in operation. Never use the tiller in the presence of others,
especially children or animals.
Do not allow minors to operate the tiller.
The tiller may only be lent to persons who are familiar with operating the
machine. Always pass on the safety and operational instructions.
Only allow persons who are rested, healthy and fit to operate the machine. If the
work is tiring, take a break in plenty of time. Do not operate the machine after
drinking alcohol.
Do not remove or cover the controls which are mounted on the tiller at the
factory, e.g. removing the clutch lever from the handlebar.
Remember to tighten all bolts and nuts before starting.
When the engine is running, do not pull the handle for forward speed and the
handle for rear speed at the same time! This will damage the transmission.
Always release one handle before the other is used.
"Beware of the rotating knives"
Working with the machine on a steep slope is
dangerous!
Only use the machine on areas where it can be
handled safely.
Assembly of models 530 / 532
1. Figure 1 shows the contents of the package:
a. Tiller with upper steer and cables.
b. Blades
c. Lower steer
d. Side guards
e. User manual and bolts
2. Mount lower steer using the accompanying bolts and nuts.
Figure 2.
3. Mount upper steer using the accompanying bolts and handwheels.
Figure 3.
4. Mount the side guards using the accompanying bolts and nuts.
Figure 4.
5. Mount the blades using the cotter bolts and pins.
It is important that the edge of the blade turns forward, as shown in figure 6, a.
Figures 5, 6.
WARNING: Follow the user manual guide to fill the engine with oil and fuel.
