IC ID: 451I-WL1835COM
This device complies with Industry
Canada licence-exempt RSS
standard(s). Operation is subject to the
following two conditions: (1) this device
may not cause interference, and (2) this
device must accept any interference,
including that may cause undesired
operation of the device.
FCC ID: Z64-WL1835COM
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Introduction
4
SWRU359E – September 2013 – Revised September 2015
Copyright © 2013–2015, Texas Instruments Incorporated
WL1835MODCOM8B WLAN MIMO and Bluetooth
®
Module EVM
(continued)
2.1
Features
•
WLAN,
Bluetooth
, BLE on a module board
•
100-pin board card
•
Dimension 76.0 mm(L) x 31.0 mm(W)
•
WLAN 2.4 GHz SISO (20- and 40-MHz channels), 2.4-GHz MIMO (20-MHz channels)
•
Support for BLE dual mode
•
Seamless integration with TI Sitara and other application processors
•
Design for TI AM335X general-purpose EVM
•
WLAN and
Bluetooth
, BLE cores are software and hardware compatible with prior WL127x, WL128x
and CC256x offerings, for smooth migration to device.
•
Shared HCI transport for
Bluetooth
and BLE over UART and SDIO for WLAN.
•
Wi-Fi /
Bluetooth
single antenna co-existence
•
Built-in chip antenna
•
Optional U.FL RF connector for external 2.4-GHz band antenna
•
Direct connection to battery using external switching mode power supply supporting 4.8-V to 2.9-V
operation
•
VIO in the 1.8-V domain
