Texas Instruments WCSP-Packaged bq24272, User Manual

Page: 5 / 27

www.ti.com
Introduction
1.4 I/O Description
Header/Terminal Block Description
J1–IN Adapter positive header
J2–IN Adapter positive terminal
J2–GND Adapter negative terminal
J3-GND Adapter negative header
J4-SYS System output positive header (bq24272 only)
J5 USB-TO-GPIO box connector
J6-SYS System output positive terminal (bq24272 only)
J6-GND System output negative terminal (bq24272 only)
J7-TS External thermistor positive terminal
J7-GND Ground terminal for external thermistor
J8-GND System output negative header (bq24272 only)
J9-BAT Battery positive header
J10-BAT Battery positive terminal
J10-GND Battery negative terminal
J11-GND Battery negative header
J12-DRV DRV reference voltage positive header
J13-DRV DRV reference voltage positive terminal
J13-GND DRV reference voltage negative terminal
J14-GND DRV reference voltage negative header
1.5 Test Points
Test Point Description
TP1 Kelvin to VIN
TP2 AGND
TP3 SW
TP4 Kelvin to SYS (bq24272 only)
TP5 PGND
TP6 PGND
TP8 Kelvin to BAT
TP9 SDA
TP10 SCL
TP11 AGND
TP12 AGND
TP13 TS
TP14 CD
TP15 INT
TP16 STAT
5 SLUU916 – April 2012 WCSP-Packaged bq24272/273 Evaluation Modules
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated