Texas Instruments UCC5304EVM-035, User Manual, Page: 7 / 21

www.ti.com
Test Summary
7 SLUUC86 – March 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
Using the UCC5304EVM-035
4.2.3 Two-Channel Function Generator Settings
Table 4 lists the 2-channel function generator settings.
Table 4. Two-Channel Function Generator Settings
Mode Frequency Duty Delay High Low Output
Impedance
Channel 1 Pulse 200 kHz 50% 0 µs 3.3 V 0 V High Z
4.2.4 Oscilloscope Setting
Table 5 lists the oscilloscope setting.
Table 5. Oscilloscope Settings
Bandwidth Coupling Termination Scale Settings Inverting
Channel 1 500 MHz or above DC 1 M Ω or automatic 10× or automatic Off
4.2.5 Jumper (Shunt) Settings
The jumper on header J1 should NOT be installed for normal testing (see Figure 1 ).
Figure 1. Jumpers Installation Position