Software Installation
www.ti.com
Table 6. Jumper Settings for a Cascaded TVP5158EVM
Jumper
Function
Setting
Comment
Designator
W2, W1, W0
TVP5158 I2C address selection
1-2, 1-2, 2-3
Slave address 0xB2 (1011 LLH0)
W3, W4
I2C master selection
OFF, OFF
Stage 1 TVP5158EVM controls TVP5158 I2C
W7, W8
I2C connection to audio DAC
OFF, OFF
Disconnected
W9
I2S selection to audio DAC
2-3
Not used
6
Software Installation
If the TVP5158EVM Software has previously been installed on the PC, it is necessary to uninstall the
previous version. To uninstall:
1. Click Start > Control Panel > Add or Remove Programs.
2. Wait for the list to populate.
3. Scroll down and click on "TVP5158EVM Software" to highlight it.
4. Click the remove button.
5. When prompted with Are you sure you want to remove TVP5158EVM Software from your computer?,
click Yes.
The TVP5158EVM software installation program is contained in a ZIP archive file containing the following
two files:
Setup.exe
TVP5158EVM_Software.msi
Unzip these two files to a temporary directory and run setup.exe. The dialog box in
Figure 4
appears.
Click Next on the dialog boxes shown in
Figure 4
,
Figure 5
, and
Figure 6
. When the installation is finished,
the dialog box shown in
Figure 7
appears. Click Close to complete the installation.
Documentation and a shortcut to the VCC application can now be found in the Windows start menu at:
Start > All Programs > TVP5158EVM > TVP5158EVM Software
Start > All Programs > TVP5158EVM > TVP5158EVM User Guide
Figure 4. TVP5158EVM Software Setup Wizard
14
TVP5158 Evaluation Module
SLEU108 – November 2009
Submit Documentation Feedback
Copyright © 2009, Texas Instruments Incorporated
