1 Introduction
The TUSB2E11EVM is designed for the TUSB2E11 device, which is an USB 2.0 compliant eUSB2 to USB 2.0
repeater supporting both device and host modes, as well as dual role applications. The TUSB2E11 repeater
supports USB 2.0 low speed (LS) and full speed (FS) signals and high speed (HS) signals.
2 EVM Quick Setup Instructions
To start using the TUSB2E11EVM, the EVM requires power, a USB connection, and an eUSB2 connection:
• The TUSB2E211EVM incorporates a Micro-AB USB 2.0 port that can be used to connect the USB signals of
the repeater to a standard USB host, hub, or devices. 5M cable lengths are supported.
• For eUSB2, the EVM has a pair of SMP connectors for connecting eUSB2 signals to eUSB2 SoCs or test
equipment.
• Depending on the switch settings, the EVM can be powered from an external 5 V wall supply, bench power
supplies, or even through the USB connector.
• The TUSB2E11EVM also incorporates an external reset push button in addition to a regular power reset
circuit.
Figure 2-1. TUSB2E11EVM Block Diagram
Introduction
2
TUSB2E11 Evaluation Module User's Guide
SLLU229 – MAY 2022
Copyright © 2022 Texas Instruments Incorporated
