TUSB216EVM
2
SNLU260 – December 2019
Copyright © 2019, Texas Instruments Incorporated
TUSB216EVM User's Guide
1
TUSB216EVM
The TUSB216 is a USB High-Speed signal conditioner, designed to compensate for ISI signal loss in a
transmission channel.
The TUSB216 design is agnostic to USB Low and Full-Speed signals and does not affect FS and LS
signaling. High-Speed signals are compensated along with programmable DC gain to fine-tune device
performance to optimize the High-Speed signals at the connector.
This EVM was designed to be used as a medium connection between a USB host and a USB device. The
EVM is designed to provide multiple connector options to help eliminate the use of adapters. The interface
to the EVM consists of three input connectors: a USB 3.1 Mini-B Receptacle, a USB 3.1 Type B
Receptacle, and a USB 3.1 Type-A Plug. The interface to the EVM consists of three a USB 3.1 Type-A
Receptacle output connectors. Each section of the EVM is detachable from the main board along the
board perforations. The EVM can be connected to the system in a similar fashion in
.
Figure 1. TUSB216 Functional System Level Block Diagram
2
TUSB216 EVM Kit Contents
This EVM kit contains the following items:
•
TUSB216 EVM board
•
This user’s manual
