Texas Instruments TUSB213, User Manual, Page: 3 / 13

www.ti.com
TUSB213 EVM Configuration
3 SLLU264 – August 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
TUSB213 Evaluation Module
2 TUSB213 EVM Configuration
2.1 TUSB213 EVM Kit Contents
This EVM kit contains the following items:
• TUSB213 EVM board
• This user’s manual
2.2 Description of EVM Board
The TUSB213 EVM is designed to provide easy evaluation of the device. It is also meant to serve as a
reference design to show a practical example of how to use the device in a mass-production system.
Figure 2 highlights the jumpers and switch installed on this EVM and Table 1 highlights their functionality
and configuration.
Figure 2. TUSB213 EVM
2.3 Configuration Switches
The TUSB213 has three switches to facilitate configuration changes. Changing these switch settings
without a complete understanding of the result is not recommended. Configuration inputs are only read by
the TUSB213 during power on reset or after de-asserting the RSTN pin, changing these switch settings
while the EVM is powered on will have no effect. Please refer to the device data sheet for detailed pin
descriptions and functionality along with EVM schematic for additional information.
The switch definitions are as follows:
• SW1 RSTN Pushbutton Switch:
– Pushbutton to place TUSB213 device in RESET
– Release to de-assert RESET