Texas Instruments TUSB1064RNQ, User Manual, Page: 2 / 16

DP Source
USB Host
TUSB1046EVM
U
SB
D
P
U
SB
T
yp
e
-C
USB Hub / Device
TUSB1064RNQEVM
U
SB
D
P
U
SB
T
yp
e
-C
DP-Branch / Sink
Introduction
www.ti.com
2 SLLU287 – March 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
TUSB1064RNQ Evaluation Module
1 Introduction
The TUSB1064 device is a USB Type-C™ / VESA
®
DisplayPort™ (DP) alternate mode redriving switch
supporting data rates up to 10 Gbps for a USB Type-C upstream facing port (UFP).
2 TUSB1064RNQ EVM
Figure 1 shows the TUSB1064RNQ EVM.
Figure 1. TUSB1064RNQ EVM
The TUSB1064RNQ EVM can be used with an Alternate mode USB Type-C source such as the
TUSB1046 EVM and/or USB or DisplayPort USB Type-C Host system to evaluate the USB Type-C
implementation.
Figure 2 shows a typical test setup.
Figure 2. Test Board Setup
The TUSB1064RNQ EVM has a legacy Type-A USB receptacle to connect to a USB hub or device and a
DisplayPort receptacle to connect to DisplayPort sink. The EVM uses TI's TPS65986 device for USB
Type-C PD control and to configure the TUSB1064.