Operation
5
Operation
The following sections of this user guide provide information on operating the TSC4270EVM.
5.1
Quick Start
After both hardware and software installation processes have been successfully completed, connect the
USB cable from the PC to the TSC4270EVM motherboard (J9 on the motherboard).
As configured at the factory, the TSC4270EVM motherboard is powered from the USB interface.
Therefore, an external power supply is not required. Upon USB connection, the green indicator LEDs on
the TSC4270EVM motherboard light up, and the +3.3 V and +1.8 V LEDs on the daughterboard also light
up.
After the TSC4270EVM is powered on, launch the TSC4270 EVM Application.exe file. The software
should automatically find the TSC4270EVM, and the GUI startup screen appears, as shown in
Figure 12. GUI Startup Screen
12
TSC4270 Evaluation Module
SBAU208 – April 2013
Copyright © 2013, Texas Instruments Incorporated
