Kit Operation
www.ti.com
7.3
Program Description
After the TSC2013EVM software is installed, the EVM board can be used to evaluate and develop the
TSC2013 device.
7.3.1
1-Finger Trace Panel
The touch-screen box in the
1-Finger Trace Panel
is updated when a touch is detected on the touch
screen (see
Figure 6
). When the touch screen is drawn on, the drawing motion on the touch screen is
translated into pixels on this box.
The display can be cleared by pressing the
Clear
button on the screen.
Figure 6. 1-Finger Trace Screen
7.3.2
2-Finger Gesture Panel
The TSC2013EVM supports three types of gestures which are zoom in or out, rotation, and 1-finger flick.
Pictures are updated when a gesture is detected by the firmware in the MSP430 device (see
Figure 7
).
For example, if a user performs a zoom in or zoom out gesture on the touch panel, the picture on the
screen zooms in or out at the same time that the gesture is performed.
Figure 7. 2-Finger Gesture Screen
6
TSC2013EVM User's Guide
SLVUA92 – July 2014
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated