LaunchPad Setup
5
LaunchPad Setup
Use the following steps to set up the LaunchPad:
1. With the LaunchPad unplugged, configure the headers on the LaunchPad to match the yellow box in
The right 3 headers are vertical and the left are horizontal.
Figure 9. LaunchPad Header Connections
2. With the LaunchPad still unplugged, remove the right-most jumper on the J5 header to match the
yellow box in
.
Figure 10. LaunchPad J5 Header Connections
3. Connect the LaunchPad to a computer with a USB-to-mini cable. A green LED and a red LED now turn
on as shown in
9
SLVUAD9 – December 2014
TS3A227E EVM User's Guide
Copyright © 2014, Texas Instruments Incorporated
