10.10 Monitor
When the
Monitor
screen (
) is selected, the screen changes to display real-time data of the
parameters that are measured by the device. This screen provides access to:
• Graphs of
Vout
,
Iout
,
Vin
,
Pout
, and
Temperature
•
Start and Stop Polling
which turns ON or OFF the realtime display of data
• Quick access to
On/Off Config
• Control pin activation and
OPERATION
command
• Margin control
• Clear Fault: Selecting
Clear Faults
clears any prior fault flags.
With two devices stacked together, the
Iout
reading is the total load supported by both devices. There is also an
Iout
which shows the current in each phase.
Figure 10-10. Monitor Screen
Using the Fusion GUI
32
TPSM8D6C24EVM-2V0 User's Guide
Copyright © 2021 Texas Instruments Incorporated
