Texas Instruments TPSM8D6C24, User Manual, Page: 4 / 38

2 Electrical Performance Specifications
Table 2-1 lists the electrical performance specifications in room temperature (20°C to 25°C). Characteristics are
given for an input voltage of V
IN
= 12 V, unless otherwise specified.
Table 2-1. TPSM8D6C24EVM-2PH Electrical Performance Specifications
Parameter Test Conditions MIN TYP MAX Unit
Input Characteristics
Input voltage range, V
IN
5 12 16 V
Full load input current
I
OUT
= 70 A 5.8 A
V
IN
= 5 V, I
OUT
= 70 A 14 A
No load input current I
OUT
= 0 A, switching enabled 123 mA
Enable switching threshold
Set by default resistor divider, JP3 and JP4 in UVLO
position
3.92 V
Disable switching threshold
Set by default resistor divider, JP3 and JP4 in UVLO
position
3.50 V
Output Characteristics
Output voltage, V
OUT
0.8
Output load current, I
OUT
0 70 A
Output voltage regulation
Line regulation: V
IN
= 5 V to 16 V 0.1%
Load regulation: I
OUT
= 0 A to 70 A 0.1%
Output overcurrent fault threshold Programmed by MSEL2 52 A
Systems Characteristics
Switching frequency Programmed by MSEL1 550 kHz
Operating case temperature I
OUT
= 70 A, Airflow = 200 LFM, 10 minute soak 99 °C
Electrical Performance Specifications www.ti.com
4 TPSM8D6C24 2-Phase Power Module Evaluation Module User's Guide SLUUCL8A – DECEMBER 2021 – REVISED FEBRUARY 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated