Texas Instruments TPS92830-Q1, User Manual, Page: 3 / 15

www.ti.com
Introduction
3 SLVUB41 – July 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
TPS92830-Q1 EVM User's Guide
1.3.1 TPS92830EVM Board
Figure 1. TPS92830EVM Board
1.3.1.1 Connectors
1.3.1.1.1 Power Supply Connector
VBAT (TP22): Input power supply (VBAT) for voltage up to 40 V
GND (TP23): Supply ground
1.3.1.1.2 LED Connector
LED1 (TP24): CH1 output, connects to LED anode
LED2 (TP25): CH2 output, connects to LED anode
LED3 (TP26): CH3 output, connects to LED anode
GND (TP27): LED output ground
1.3.1.2 Jumpers
1.3.1.2.1 LED Output Jumper – J1
Pin 1: CH1 output, connects to LED anode
Pin 2: CH2 output, connects to LED anode
Pin 3: CH3 output, connects to LED anode
Pin 4: ICTRL function, connects to analog dimming resistor on LED board
Pin 5: LED output ground