The
Device
window show a variety of measurements, faults, and settings for the device that are not specific to a
Figure 6-22. Device Window - Channel and Systems Voltage Measurements
The
Thermal
window,
Current Temp
which is a reading of the TEMPL/H registers. The
TW Limit
is a setpoint for the thermal warning limit that is defined in the TWLMT register. If the
Current Temp
exceeds the
TW Limit
then the TW bit is set. The
Device
window also shows the measured voltage of the V5D
pin using the internal ADC.
Figure 6-23. Temperature, V5D Measurement, and TW Setpoint
TPS92520EVM-133 Power UP and Operation
SLUUCC4 – OCTOBER 2020
TPS92520EVM-133 Dual 1.6-A Synchronous Buck LED Driver Evaluation
Module
47
Copyright © 2020 Texas Instruments Incorporated
