Texas Instruments TPS7H4002EVM-CVAL, User Manual, Page: 7 / 29

4.3 Soft Start-up
Display CH1 (PH1) and CH2 (VOUT1) [DC coupled, 500 mV/div] on the oscilloscope to monitor the switching
phase and the soft start profile of the output voltage as shown in
Figure 4-3 .
Figure 4-3. Output Soft Start Voltage, VIN = 5 V, VOUT = 2.5 V, IOUT = 3 A
www.ti.com TPS7H4002EVM-CVAL Testing
SLVUBI1 – MAY 2021
Submit Document Feedback
TPS7H4002EVM-CVAL Evaluation Module 7
Copyright © 2021 Texas Instruments Incorporated