ADS1282-SP GUI Software in Detail
19
SBAU274 – July 2016
Copyright © 2016, Texas Instruments Incorporated
ADS1282-SP Evaluation Module (ADS1282EVM-CVAL)
The bottom-most border displays the state of the connection, the firmware revision detected and access to
the log pane by clicking on the book icon as shown in
.
Figure 18. ADS1282-SP GUI Bottom-Most Border
6.2
Quick Start Page
The
Quick Start
page (accessed by clicking the lightning bolt icon) provides a quick and easy way to start
evaluating the device. The first time the GUI is used, this page defaults to a step-by-step process. This
step-by-step process can be bypassed by clicking the
Show All Steps
link.
Figure 19. ADS1282-SP GUI Quick Start STEP-1
STEP-2
of the
Quick Start
page is
Device Clock Selection
as shown in
. There are three
options for configuring the clock (1)
4.096 MHz On Board XTAL
(default), (2)
MSP430 Clock
, and (3)
User Specified Clock
.