Texas Instruments TPS66020EVM, User Manual

Page: 1 / 20

1 SLVUBQ4 – July 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
TPS66020 Evaluation Module
User's Guide
SLVUBQ4 – July 2019
TPS66020 Evaluation Module
This document is the user guide for the TPS66020 Evaluation Module (TPS66020EVM). The
TPS66020EVM allows for evaluation of the TPS66020 IC as part of a stand-alone testing kit and testing of
USB Type-C and Power Delivery (PD) end products. Out of the box, the TPS66020EVM can be used to
test the Source and Sink paths in addition to trying the different protection schemes, such as OVP
(Overvoltage Protection).
Contents
1 Introduction
...................................................................................................................
1
2 TPS66020EVM Board Setup
..............................................................................................
3
3 Using the TPS66020EVM
..................................................................................................
4
4 Application Example: Interfacing the TPS66020 EVM with a PD Controller EVM.
...............................
10
5 Schematic and Bill of Materials
...........................................................................................
12
List of Figures
1 TPS66020EVM Board
.......................................................................................................
2
2 TPS660020EVM Block Diagram
...........................................................................................
2
3 Supplying Power to the TPS66020EVM Using the Micro-USB Connector J2
......................................
5
4 Source Path Configuration
.................................................................................................
6
5 Sink Path Configuration
....................................................................................................
8
6 Overvoltage Protection Level Jumper
..................................................................................
10
7 Connecting the TPS66020EVM to the PD Controller TPS65988 EVM
............................................
10
8 PD Transactions and VBUS Timing Waveform
.......................................................................
11
9 TPS66020EVM Schematics
..............................................................................................
12
List of Tables
1 TPS66020 Functional Table and EVM Jumper Settings
..............................................................
3
2 Jumpers Description
........................................................................................................
3
3 Connector Functionality
.....................................................................................................
4
4 Test Points
....................................................................................................................
4
5 Bill of Materials
.............................................................................................................
13
Trademarks
1 Introduction
Texas Instrument's (TI’s) TPS66020 evaluation module helps designers evaluate the operation and
performance of the TPS66020 device.
The TPS66020 is a full-featured power switch multiplexer that contains an integrated 5-V Source power
path and a 4-V to 22-V Sink power path. The 5-V Source path limits the output current to a safe level by
operating in a constant-current mode when the output load exceeds the selected current-limit threshold.
Each power path supports overtemperature and reverse current protection. VBUS has overvoltage
protection with its level being set by an optional external resistor divider. If no overvoltage protection is
desired, it may be disabled by grounding the OVP terminal. The TPS6602x series supports a fault pin that
indicates overcurrent and overtemperature events.
The TPS66020EVM has jumpers, header and test points that will permit to test the Source and Sink
configuration in addition to the protection schemes.