Texas Instruments TPS65265EVM-705, User Manual, Page: 6 / 13

Bench Test Setup Conditions
www.ti.com
4 Bench Test Setup Conditions
4.1 Header Description and Jumper Placement
Figure 7 shows the jumper and pin placement on the TPS65265EVM-705 board.
Figure 7. TPS65265EVM-705 Header Description and Jumper Placement
Test points:
(A) LX of VOUT1
(B) LX of VOUT2
(C) LX of VOUT3
VOUT1, VOUT2, VOUT3, VIN, PGOOD, PG_DLY, SYNC
Table 2. Input/Output Connection
# Function Description
J1 Buck1 Connector Output of Buck1
J2 Buck2 Connector Output of Buck2
J3 Buck3 Connector Output of Buck3
J5 VIN Connector Apply power supply to this connector
6 TPS65265EVM-705 Evaluation Module SLVUAK9 – December 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated