Texas Instruments TPS65265, User Manual

Page: 8 / 16

Table 4-2. Jumpers (continued)
# Function Placement Comment
J8 Buck3 enable (EN3) Connect EN3 to GND to disable VOUT3
spa
Connect EN3 to HIGH or leave open to enable VOUT3
J9 MODE Power sequencing mode control pin.
spa
Connect MODE pin to GND or HIGH, set the power sequence with
pre-defined power up and power down sequence.
spa
Leave open to set power up and down with dedicated enable pin.
Bench Test Setup Conditions www.ti.com
8 TPS65265 Buck Converter Evaluation Module User's Guide SLVUAK9A – DECEMBER 2015 – REVISED MAY 2021
Submit Document Feedback
Copyright © 2021 Texas Instruments Incorporated