Texas Instruments TPS62110EVM-101, User Manual, Page: 3 / 9

www.ti.com
2.2 Setup
3 Board Layout
3.1 Layout
Board Layout
To operate the EVM, simply connect an input supply to the appropriate pins, and then connect a load to
the appropriate pins. Maximum recommended load is 1.5 A or 2.2
Ω
. Input supply of 6 V to 17 V is
recommended.
This section provides the TPS62110EVM-101 board layout and illustrations.
Figure 1 shows the board layout for the TPS62110EVM-101 PWB.
Figure 1. Assembly Layer
TPS62110EVM-101 SLVU135 – June 2005 3