2-1
Evaluation With the TPS6204xEVM
!"
This chapter details the evaluation process and features of the EVM. For this
purpose, a load is connected to the output pins V
O
and GND, which allows the
load current to be adjusted between 0 A and 1.2 A.
For accurate output voltage and input voltage measurements, it is important
to measure the voltage on the input and output voltage terminals with a
voltmeter connected directly to the input voltage or output voltage terminals.
This eliminates any measurement errors related to voltage drops along the
input and output terminal wires connected to the power supply or load.
Topic
Page
2.1
Enable (EN) Jumper
2-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2
Mode Selection Jumper
2-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2
Summary of Contents for TPS6204xEVM
Page 1: ... July 2003 PMP Portable Power User s Guide SLVU089 ...
Page 6: ...iv ...
Page 8: ...vi ...
