Contents
iii
Contents
Preface
About This Manual
This user’s guide describes the characteristics, operation, and use of the
TPS61030EVM-029 synchronous boost converter evaluation module (EVM).
This EVM features a Texas Instruments high-efficiency, single-cell Li-Ion,
dual-cell battery boost converter that is configured to deliver 5.0V at 1A with
an input voltage of 1.8V. This user’s guide includes setup instructions, a sche-
matic diagram, a bill of materials (BOM), characterization results, and printed
circuit board (PCB) layout drawings for the evaluation module.
How to Use This Manual
This document contains the following chapters:
-
Chapter 1—Introduction
-
Chapter 2—Setup
-
Chapter 3—Board Layout
-
Chapter 4—Schematic and Bill of Materials
Related Documentation From Texas Instruments
The following document provides information regarding Texas Instruments
integrated circuits used in the assembly of the TPS61030EVM-029. This
document is available from the TI web site. The last character of the litera-
ture number corresponds to the document revision, which is current at the
time of the writing of this User’s Guide. To obtain a copy of the following TI
document, visit our website at http://www.ti.com/ or call the Texas Instru-
ments Literature Response Center at (800) 477−8924 or the Product Infor-
mation Center at (972) 644−5580. When ordering, identify the document by
both title and literature number.
Data sheet
Literature number
TPS61030 Data Sheet
SLUS534