Setup of the EVM
1-3
Introduction
1.3
Setup of the EVM
It is important to establish all connections to the EVM before the power supply
connected to the EVM is turned on.
1) Connect a power supply (0.9 V to V
O
, depending on the output voltage of
the EVM) to the INPUT header.
2) Connect a voltmeter to the OUTPUT header.
3) Verify that the jumper, J1, is set to EN.
4) Turn on the power supply and verify the output voltage.
Summary of Contents for TPS61007EVM-177
Page 4: ...iv...
Page 10: ...1 4 Introduction...
Page 15: ...PCB Layout of the TPS61007EVM 177 SLVP177 3 3 PCB Layout Figure 3 3 Bottom Layer...
Page 16: ...3 4 PCB Layout...