Texas Instruments TPS60230EVM-047 User Manual Download Page 5

Preface

Read This First

About This Manual

This user’s guide provides the information needed to set up and operate the
TPS60230EVM-047 evaluation module. For a more detailed description of the
TPS60230, please refer to the product data sheet available from the Texas In-
struments web site at 

http://www.ti.com

. Additional support documents are

listed in the sections of this guide entitled Related Documentation from Texas
Instruments
.

How to Use This Manual

Throughout this document, the acronym EVM and the phrase evaluation
module
 are synonymous with the TPS60230EVM−047.

Related Documentation From Texas Instruments

The following document(s) provide information regarding Texas Instrument in-
tegrated circuits used in the assembly of the TPS60230EVM−047. These doc-
uments are available from the TI web site. The last character of the literature
number corresponds to the document revision, which is current at the time of
the writing of this user’s guide. Newer revisions may be available from the TI
web site at 

http://www.ti.com

 or by calling the Texas Instruments Literature Re-

sponse Center at (800) 477−8924 or the Product Information Center at (972)
644−5580. When ordering, identify the document(s) by both title and literature
number.

Data Sheets:

Literature Number:

TPS60230

SLVS516

Summary of Contents for TPS60230EVM-047












Reviews: