10.3 Changing ON_OFF_CONFIG
Changing the
On/Off Config
prompts a pop-up window with details of the options shown in
pop-up gives multiple options on what turns on and off power conversion. By default, the TPS546B24A is
configured to
CONTROL Pin Only
. This is the EN/UVLO pin.
Figure 10-3. Configure – ON_OFF_CONFIG
Using the Fusion GUI
SLUUC48A – FEBRUARY 2020 – REVISED FEBRUARY 2022
TPS546B24A 2-Phase SWIFT™ Step-Down Converter Evaluation Module
User's Guide
33
Copyright © 2022 Texas Instruments Incorporated