3.3 Layout and Component Placement
and
show the top and bottom assemblies of the printed circuit board (PCB) to show the
component placement on the EVM.
and
show the top and bottom layouts,
layers, and
shows the top solder mask of the EVM.
Figure 3-2. Component Placement—Top Assembly
Figure 3-3. Component Placement—Bottom
Assembly
Figure 3-4. Layout—Top
Figure 3-5. Layout—Bottom
Figure 3-6. Top Layer
Figure 3-7. Bottom Layer
Schematic, Bill of Materials, and Layout
8
TPS36Q1EVM Voltage Supervisor User Guide
SLVUCG9 – OCTOBER 2022
Copyright © 2022 Texas Instruments Incorporated
