TPS23861EVM-612 PI Commander GUI Setup
As the program GUI starts, the window in
appears showing the devices found in the scan. Device
#1 (two-pair ports 1-4) is at address 20 and device #2 (four-pair ports 1 and 2) is at address 28. Click the
OK
button.
Figure 6. Devices Found in Scan
Choose device #1 (UNKNOWN 20) or device #2 (UNKNOWN 28).
Figure 7. Detected Devices Selection
Once the following window pops up, click the
OK
button.
Figure 8. Device Selector Approval
11
SLUUAY8C – March 2014 – Revised November 2015
TPS23861EVM-612: Auto-Mode Evaluation Module for TPS23861
Copyright © 2014–2015, Texas Instruments Incorporated