TPS23861EVM-612 PI Commander GUI Setup
11. Pressing the “S” key on the keyboard starts the program
Figure 18. Program Started
12. The TPS23861EVM-612 is now waiting for a PD load to be installed. As ports are installed, the
firmware automatically detects, classifies, and powers up the port as shown in the following image.
Port status is updated on the screen approximately every 8 seconds
Figure 19. Terminal Response with Connected Ports
13. In similar fashion, the builds for Semi-auto and auto mode operation can be configured and launched.
The terminal welcome screen indicates which build is running on the LaunchPad.
19
SLUUAY8C – March 2014 – Revised November 2015
TPS23861EVM-612: Auto-Mode Evaluation Module for TPS23861
Copyright © 2014–2015, Texas Instruments Incorporated