Texas Instruments TPD1E10B09-Q1, User Manual

Page: 1 / 12

1 SLVUAU0 – July 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
TPD1E10B09-Q1 Evaluation Module
User's Guide
SLVUAU0 – July 2016
TPD1E10B09-Q1 Evaluation Module
This user's guide describes the characteristics, operation, and use of the TPD1E10B09-Q1 EVM
evaluation module (EVM). This EVM includes six TPD1E10B09-Q1s in various configurations for testing.
Five TPD1E10B09-Q1s are configured for IEC 61000-4-2 compliance testing and one is configured for 2-
port s-parameter analysis. This user's guide includes setup instructions, schematic diagrams, a bill of
materials, and printed-circuit board layout drawings for the evaluation module.
Contents
1 Introduction
...................................................................................................................
2
2 Definitions
.....................................................................................................................
2
3 Setup
..........................................................................................................................
3
3.1 IEC 61000-4-2 ESD Rating Tests
................................................................................
3
3.2 Scattering Parameters
.............................................................................................
4
3.3 ±8-kV ESD Clamping Waveforms
................................................................................
4
4 Board Layout
.................................................................................................................
6
5 Schematic
.....................................................................................................................
6
6 Bill of Materials
...............................................................................................................
7
List of Figures
1 Ideal Contact Discharge Waveform of the Output Current of the ESD Simulator at 8-kV
.........................
3
2 System Level ESD Test Setup
.............................................................................................
4
3 TPD1E10B09-Q1EVM Top Layer and Silkscreen
.......................................................................
6
4 TPD1E10B09-Q1EVM Schematic
.........................................................................................
6
List of Tables
1 IEC 61000-4-2 Test Levels
................................................................................................
2
2 Waveform Parameters in Contact Discharge Mode
.....................................................................
2
3 Bill of Materials
...............................................................................................................
7