www.ti.com
1
Introduction
1.1
Feature Highlights
1.2
Description
Introduction
The Texas Instruments (TI) TPA6020A2 audio amplifier evaluation module includes the following features:
•
TPA6020A2 Stereo, Low-Voltage, Audio Power Amplifier Evaluation Module
–
Stereo
–
Fully differential amplifier
–
Dual-channel, bridge-tied load (BTL)
–
2.5-V to 5.5-V operation
–
2.8-W per channel output power into 3
Ω
at 5 V, BTL
–
Internal depop and quick start-up circuitry
–
Internal thermal and short-circuit protection
–
Module gain is set at 2 V/V
The TPA6020A2 audio power amplifier evaluation module is a complete, stereo, low-power, dual-channel,
audio power amplifier. It consists of the TI TPA6020A2 2.8-W, low-voltage, audio power amplifier IC along
with a small number of other parts mounted on a circuit board that is approximately 2-in. long by 1.5-in.
wide (see
).
Figure 1. TI TPA6020A2 Audio Amplifier Evaluation Module
Single in-line header pins are mounted to the underside of the module circuit board. These pins allow the
EVM to be wired directly into existing circuits and equipment.
TPA6020A2 Audio Power Amplifier Evaluation Module
2
SLOU175A – June 2005 – Revised August 2005
