Texas Instruments TMXEVM388, Quick Start Manual

Page: 4 / 15

Running IPNC Application
www.ti.com
4 SPRUI82A – August 2016 – Revised September 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
TMXEVM388 Quick Start Guide
• IPNC application software source code and object libraries – based on Multi Channel FrameWork
(McFW)
• IPNC boot utilities source code – u-boot
• Pre-compiled u-boot, uImage, target file system (nfs) for IPNC hardware for quick installation
3 Running IPNC Application
3.1 Full System Setup Overview
Figure 5. Full Setup Required for Testing With Component Video Input
Steps to setup testing environment with component video input source:
1. Connect analog component cable from component video player (DVD Player) to DM38x EVM as
shown in Figure 5 and Figure 6 .
2. Connect debug (serial) cable to the configuration PC as shown in Figure 5 and Figure 7 .
3. Connect HDMI cable from base-board (on DM38x EVM) to ‘Local Display’ as shown in Figure 5 .
4. Connect DM38x EVM and ‘IPNC configuration PC’ through Ethernet cable directly or using network
hub as shown in Figure 5 .
5. Make sure that ‘IPNC Configuration PC’ and EVM are connected in same network to ensure proper
network connectivity between the two.