Texas Instruments TMS320DM6467 DVEVM, Getting Started Manual, Page: 46 / 72

Setting Up the Build/Development Environment
4-14
4.4 Setting Up the Build/Development Environment
To set up the GPP-side development and build environment, follow these
steps:
1) Log in to your user account (and not as root) on the NFS host
system.
2) Set your PATH so that the MontaVista tool chain host tools and cross
compiler (arm_v5t_le-gcc) can be found. For example, in a default
installation of the MontaVista LSP, you should add a definition like the
following to your shell resource file (for example, ~/.bashrc):
PATH="/opt/mv_pro_5.0/montavista/pro/devkit/arm/v5t_le/bin:
/opt/mv_pro_5.0/montavista/pro/bin:
/opt/mv_pro_5.0/montavista/common/bin:$PATH"
If you installed in a location other than /opt/mv_pro_5.0, use your own
location in the PATH.
3) Remember to use the following command after modifying your
.bashrc file:
host $ source ~/.bashrc
4.4.1 Writing a Simple Program and Running it on the EVM
Make sure you have performed the steps in Section 4.3.7, Exporting a
Shared File System for Target Access and Section 4.4, Setting Up the
Build/Development Environment .
Perform the following steps on the NFS host system as user (not as root):
1) host $ mkdir /home/< useracct >/workdir/filesys/opt/hello
2)
host $
cd /home/< useracct >/workdir/filesys/opt/hello
3) Create a file named hello.c using a text editor (for example, gedit,
kedit, xemacs, or vi), and add the following contents to it:
#include <stdio.h>
int main() {
printf("Buongiorno DaVinci!\n");
return 0;
}
4) host $ arm_v5t_le-gcc hello.c -o hello