Texas Instruments TMS320DM6446 DVEVM v2.0, Getting Started Manual

Page: 42 / 76

Installing the Software
4-10
4) Perform the following commands to create a copy of the target file
system with permissions set for writing to the shared area as
<useracct> . Substitute your user name for <useracct> . If you
installed in a location other than /opt/mv_pro_5.0, use your location
in the cp command.
host $ cp -a /opt/mv_pro_5.0/montavista/pro/devkit/arm/v5t_le/target/*
.
host $ chown -R <useracct> opt
5) Edit the /etc/exports file on the host Linux workstation (not the
exports file on the target filesystem). Add the following line for
exporting the filesys area, substituting your user name for
<useracct> . Use the full path from root; ~ may not work for exports
on all file systems.
/home/< useracct >/workdir/filesys *(rw,no_root_squash,no_all_squash,sync)
Note: Make sure you do not add a space between the * and the ( in
the above command.
6) Still as root, use the following commands to make the NFS server
aware of the change to its configuration and to invoke an NFS restart.
host $ /usr/sbin/exportfs -av
host $ /sbin/service nfs restart
Note: Use
exportfs -rav
to re-export all directories. Use
/etc/init.d/nfs status
to verify that the NFS status is running.
7) Verify that the server firewall is turned off:
host $ /etc/init.d/iptables status
If the firewall is running, disable it:
host $ /etc/init.d/iptables stop