Setting up the EVM for Linux Software Development
In addition to the steps above, the following steps will set up your EVM for Linux software development.
11.
Connect the provided Ethernet cable to the Ethernet port on the EVM board. The other end of the cable
needs to be connected to a network accessible by your Linux development host.
12.
Connect the provided RS-232 null modem cable to the EVM UART port. The other end of the cable needs
to be connected to your Linux development host.
After completing the EVM setup continue with the toolchain and DVSDK installation steps provided on the
DVSDK download page.
EVM Hardware Overview
To better understand the DM365 EVM hardware, you may want to review the DM365 EVM Technical
Reference which can be found by visiting Spectrum Digital website.
Software Updates
The latest DVSDK software can be downloaded from the following link:
http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/dvsdk/index.html
TI Worldwide Technical Support
TMS320DM365 EVM Quick Start Guide
Setting up the EVM for Linux Software Development
7
