Using the TMP461EVM Software
24
SBOU152A – July 2015 – Revised September 2019
Copyright © 2015–2019, Texas Instruments Incorporated
TMP461EVM Software Overview
3.2.6 Register Tab
The Register Map page shown in
allows low-level access to all the I2C registers of the
TMP461 device. Clicking on the question mark to the right of the Register Name will pull a short
description of that register from the data sheet. Clicking on a specific Register Name will populate the
Field View to on the right side of the screen. The Field View describes each bit field within that register.
The “Registers” tab provides access to the registers raw data of the TMP461. Changes to the
configuration page are mirrored here, and vice versa.
Figure 3-17. TMP461EVM Register Tab
Read Registers:
performs a single read for the selected register.
Read All Registers:
performs a read for all registers contents.
Auto Read:
allows the user to set the desired time frame to fetch the register data.
