Using the TMP461EVM Software
17
SBOU152A – July 2015 – Revised September 2019
Copyright © 2015–2019, Texas Instruments Incorporated
TMP461EVM Software Overview
3.2.3 Quick Start Tab
The Quick Start Tab is used to guide you through the basic settings of the TMP461EVM. You can either
set up the EVM under the default settings, or be guided through the setup. If you decide to use the default
settings, you will go straight to the Data Capture tab. After selecting the default settings, you can choose
to go back to the Quick Start Tab to be guided through the setup again, or you change the device settings
in the Basic Settings Tab.
Figure 3-11. TMP461EVM Quick Start Tab
