TMP112EVM Software Overview
5
TMP112EVM Software Overview
This section discusses how to use the TMP112EVM software.
5.1
Starting the TMP112EVM Software
The TMP112 software can be operated through the Windows
Start
menu. From Start, select
All Programs
;
then select the
TMP112EVM
program.
shows how the software appears if the TMP112EVM is functioning properly.
Figure 10. TMP112EVM Software Interface
shows an error message that is displayed if the computer cannot communicate with the SM-
USB-DIG platform. If you receive this error message, first check that the USB extension cable is properly
connected to both the computer USB port and to the SM-USB-DIG platform. Another possible source for
this error is a problem with the computer USB human interface device driver. Make sure that the device is
recognized when the USB cable is plugged in; recognition is indicated by a Windows-generated
confirmation sound.
Figure 11. TMP112EVM Software: Communication Error with the SM-USB-DIG Platform
11
SBOU144 – August 2014
TMP112EVM Evaluation Board and Software Tutorial
Copyright © 2014, Texas Instruments Incorporated
