Texas Instruments TMP108EVM, User Manual, Page: 9 / 22

www.ti.com
Software
9 SNIU036 – September 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
TMP108EVM User's Guide
5.3 Settings Tab
The Settings tab provides the hardware configuration for the USB to I2C bridge and device features for the
TMP108 device.
Selecting the wrong Device I2C Address will cause the GUI to disconnect from the USB device. The
hardware must be modified at the TMP108 device to change the TMP108's address. The link icon in the
bottom left corner indicates the current connection status, and the user can click on the area to change
the connection status.
If the user makes changes to the High Limit and Low Limit fields, this will trigger an immediate write to the
TMP108's Limit register if Immediate mode is enabled on the Registers tab.
The Send One Shot button will force a I2C write to the TMP108's Configuration register with the M1 bit set
to 1.
Figure 4. Settings