Texas Instruments TMP104EVM, User Manual, Page: 3 / 25

Computer
SM-USB-DIG
TMP104EVM
USB
10-Pin
www.ti.com
TMP104EVM Hardware Setup
1.2 Related Documentation from Texas Instruments
The following documents provide information regarding Texas Instruments' integrated circuits used in the
assembly of the TMP104EVM. This user's guide is available from the TI web site under literature number
SBOU118. Any letter appended to the literature number corresponds to the document revision that is
current at the time of the writing of this document. Newer revisions may be available from the
TI web site ,
or call the Texas Instruments' Literature Response Center at (800) 477-8924 or the Product Information
Center at (972) 644-5580. When ordering, identify the document by both title and literature number.
Table 2. Related Documentation
Document Literature Number
TMP104 product data sheet SBOS564
SM-USB-DIG platform user guide SBOU098
2 TMP104EVM Hardware Setup
The TMP104EVM hardware consists of the SM-USB-DIG and TMP104 Test Board; these components are
easily connected through a 10-pin, board-to-board connector that should be attached to the SM-USB-DIG
platform and the TMP104 Test Board. Once these two boards are connected, simply plug the USB device
from the SM-USB-DIG into the computer, as shown in
Figure 2 .
Figure 2. TMP104EVM Hardware Setup
3 SBOU118 – October 2011 TMP104EVM Evaluation Board and Software Tutorial
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated