TMP102EVM Software Overview
5
TMP102EVM Software Overview
This section discusses how to use the TMP102EVM software.
5.1
Starting the TMP102EVM Software
The TMP102 software can be operated through the Windows Start menu. From Start, select All Programs;
then select the TMP102EVM program.
illustrates how the software should appear if the TMP102EVM is functioning properly.
Figure 10. TMP102EVM Software Interface
shows an error message that is displayed if the PC cannot communicate with the SM-USB-DIG
platform. If you receive this error message, first check to see that the USB extension cable is properly
connected to both the PC USB port and to the SM-USB-DIG platform. Another possible source for this
error is a problem with the PC USB Human Interface Device driver. Make sure that the device is
recognized when the USB cable is plugged in; recognition is indicated by a Windows-generated
confirmation sound.
Figure 11. TMP102EVM Software: Communication Error with the SM-USB-DIG Platform
11
SBOU114
–
August 2011
TMP102EVM Evaluation Board and Software Tutorial
Copyright
©
2011, Texas Instruments Incorporated