Texas Instruments TMP006EVM, User Manual

Page: 6 / 23

TMP006EVM Hardware Setup
www.ti.com
2.2 Bill of Materials for the TMP006 Test Board
Table 2 lists the bill of materials for the TMP006EVM board.
Table 2. TMP006 Test Board Parts List
Qty RefDes Value Description Part Number MFR
1 C1 1 μ F Capacitor, Ceramic 1.0 μ F 16V X7R 10% 0603 C1608X7R1C105K TDK
1 C2 0.01 μ F Capacitor, Ceramic 10000pF 25V X7R 10% 0402 C1005X7R1E103K TDK
1 D1 LED Alingap Grn Wht Diff 0603SMD SML-LX0603SUGW- Lumex
TR
1 FB1 Ferrite Bead 300 Ω .2A 0402 74279272 Wurth
1 H1 Connector, Socket 50-Pl .050 R/A Sngl 851-43-050-20- Mill-Max
001000
1 H2 Connector, FPC/FFC 10-Pos .5mm Horz SMD FH12-10S-0.5SH(55) Hirose
1 Q1 MOSFET P-CH 50V 130mA SC70-3 BSS84W-7-F Diodes Inc
2 R1, R2 0 Ω Resistor, 0.0 Ω 1/16W 0402 SMD MCR01MZPJ000 Rohm
3 R3, R4, R5 47k Resistor, 47.0k Ω 1/16W 1% 0402 SMD MCR01MZPF4702 Rohm
1 R6 160 Ω Resistor, 160 Ω 1/16W 1% 0402 SMD MCR01MZPF1600 Rohm
1 U1 Infrared Sensor with Digital Interface TMP006 Texas Instruments
2.3 Signal Definition of H1 (10-Pin Female Socket)
Table 3 identifies the signals connected to the H1 connector on the TMP006 Test Board. This summary
also identifies the signals that are used with the TMP006EVM along with the respective signal names.
Table 3. Signal Definitions for H1 (10-Pin Female Socket) on TMP006EVM Board
Used on the TMP006 Test Board
Pin No. Signal TMP006EVM? Signal
1 I2C_SCL Yes SCL
2 CTRL/MEAS4 Yes DRDY
3 I2C_SDA1 Yes SDA
4 CTRL/MEAS5 No —
5 SPI_DOUT1 Yes SDO
6 VDUT Yes VCC
7 SPI_CLK Yes SCLK
8 GND Yes GND
9 SPI_CS1 Yes CS
10 SPI_DIN1 Yes SDI
6 TMP006EVM User Guide and Software Tutorial SBOU109A – May 2011 – Revised October 2011
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated