Texas Instruments TMAG5328, User Manual, Page: 23 / 36

secured into the base (see Figure 5-24 ), the sensed magnetic flux density will be larger than the 15-mT B
OP
maximum that is supported by the TMAG5328, so the TMAG5328 OUT pin will be asserted low and LED D1
will be ON.
Figure 5-24. Screw Fully Fastened Into Base
For more information on the Head-On Linear Displacement attachment, refer to the Head-on Linear
Displacement 3D Attachment user's guide .
6 Schematics, PCB Layout, and Bill of Materials
The following sections list the schematics, PCB layouts, and bill of materials for the TMAG5328.
www.ti.com Schematics, PCB Layout, and Bill of Materials
SBAU376 – DECEMBER 2021
Submit Document Feedback
TMAG5328 Evaluation Module 23
Copyright © 2021 Texas Instruments Incorporated