Texas Instruments TMAG5170, User Manual, Page: 2 / 22

2 Overview
The TMAG5170 is a 3-axis linear Hall effect sensor. This device integrates three independent Hall sensors in X,
Y, and Z axes. A precision analog signal-chain along with integrated 12-bit ADC digitizes the measured analog
magnetic field values. The device can be configured further to select one of three magnetic field ranges that suits
the magnet strength and component placements during system calibration.
Table 2-1. TMAG5170 Device Summary
PRODUCT SENSITIVITY RANGE OPTIONS
TMAG5170A1 ±25 mT, ±50 mT, ±100 mT
TMAG5170A2 ±75 mT, ±150 mT, ±300 mT
2.1 Kit Contents
Table 2-2 lists the contents of the EVM kit. Contact the nearest Texas Instruments Product Information Center if
any component is missing.
Table 2-2. Kit Contents
ITEM QUANTITY
TMAG5170UEVM 1
Rotate and push 3D print module 1
Handheld magnet 1
2.2 Related Documentation From Texas Instruments
This user's guide is available from the TI website under literature number SBAU350 . Any letter appended to the
literature number corresponds to the document revision that is current at the time of the writing of this document.
Newer revisions are available from
www.ti.com or the Texas Instruments' Literature Response Center at (800)
477-8924 or the Product Information Center at (972) 644-5580. When ordering, identify the document by both
title and literature number.
Table 2-3 lists documentation related to the EVM. Click the links in Table 2-3 for
further information. The device name links to the product web folder on www.ti.com . The literature number links
to the document PDF.
Table 2-3. Related Documentation
DOCUMENT TITLE
DOCUMENT LITERATURE
NUMBER
TMAG5170 data sheet SBASAF4
TMAG5170-Q1 data sheet SBAS934
TI-SCB User's Guide SLAU839
Overview www.ti.com
2 TMAG5170UEVM SBAU388A – SEPTEMBER 2021 – REVISED FEBRUARY 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated