background image

Test Setup and Results

www.ti.com

6

SLAU753 – December 2017

Submit Documentation Feedback

Copyright © 2017, Texas Instruments Incorporated

TLC6C5724-Q1 Evaluation Module

ADVANCE INFORMATION

2.3.2

Quick Start Page

The LED brightness is adjustable and the channel status is easily read on the

Quick Start

page. There are

two kinds of LEDs on the EVM, monochrome LEDs and RGB LEDs. The LED groups can be controlled
individually or globally. For monochrome LEDs, if the

Apply this brightness to all monochrome LEDs

option is selected, all monochrome LEDs are dimmed at the same brightness, if not, the LEDs are
controlled individually. For RGB LEDs, if the

Apply this color to all color LEDs

option is selected, all the

four RGB LEDs color are changed simultaneously with the same color, if not, each RGB LED is changed
individually.

At the right side of the GUI, the LED status is read out every 2 seconds. A Green color of the status
stands for no error, Red color status stands for fault status. By clicking the button next to

APS OK

, the

detailed LOD and LSD information will show up.

At the bottom right of the page, the configuration can be saved locally. On subsequent uses of the GUI,
the existing configuration data can be loaded directly. For detailed features configuration, can click the

GO

ADVANCED!

button.

Figure 5. Quick Start Page

Summary of Contents for TLC6C5724-Q1
















Reviews: