Texas Instruments TLC6983, User Manual, Page: 3 / 14

2 Test Setup and Results
This section describes the TLC6983EVM connections, test points, and jumpers.
2.1 TLC6983 EVM Board
Figure 2-1 shows the image of driver IC side of TLC6983EVM board.
Figure 2-1. Driver IC Side of TLC6983EVM Board
2.2 Connectors
The TLC6983EVM has the following connectors:
• TP1(+5 V): Input power supply for VLEDG/VLEDB and DCDC
• TP2 (GND): Supply ground
• J1, J2: Boosterpack connectors for connecting with the MSP430F5529 LaunchPad
• J3: Mini-USB connector for 5 V power input
2.3 Jumpers
The TLC6983EVM has the following jumpers:
• J4 (5 V Jumper): Input 5 V power supply from J3 or J1/J2
• J4 (3 V3 Jumper): Input 3 V3 power supply from J3 (DCDC) or J1/J2
www.ti.com Test Setup and Results
SLVUC04 – DECEMBER 2020
Submit Document Feedback
TLC6983 48x16 Common Cathode Matrix LED Display Driver Evaluation
Module
3
Copyright © 2020 Texas Instruments Incorporated